Centre du Rasoir RICARDO Посібник з догляду та інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з догляду та інструкція з експлуатації для Кухонна техніка Centre du Rasoir RICARDO. Centre du Rasoir RICARDO 10 сторінок. Sous vide precision cooker

Друкувати сторінку

COOKING PHASE LED INDICATOR

The

sous vide precision cooker is designed with a unique LED colour changing light

ring that indicates the cooking phase every step of the way!

PREHEATING MODE

Once the temperature and timer parameters have been set and the

preheating stage will start. The LED light ring will light up blue indicating that the appliance is in

preheating stage as the water starts heating and circulating. The set temperature will appear on

the lower display for 4 seconds (the set temperature icon is lit), it will then disappear to show the

set timer for 4 seconds (set timer icon

is lit). The display will toggle back and forth between set

temperature and set timer until the desired temperature is reached.

No food should be added into water bath at this stage. Preheating time may vary depending

on the current and set water temperature, food quantity as well as external factors such as

ambient temperature.

COOKING MODE

Once the preheating stage is completed, the appliance will beep 3 times and the LED light ring

will change to red, indicating the appliance has switched to the cooking stage. Food must be

immersed into water bath at this stage. Ensure the food is not floating above the water, it must be

fully submerged and must remain so throughout the entire cooking phase.

COMPLETED

Once timer is completed, the appliance will emit 3 beep sounds, 3 times consecutively (total of

9 beeps). The appliance will stop heating and circulating water, timer will turn off and the LED light

ring will change to green colour, indicating cooking is completed. Only current water temperature

will be shown on upper display.

User manual

button is pressed, the

USING THE SOUS VIDE PRECISION COOKER

During first use of the appliance, smoke and/or a slight odour may occur from the appliance

because of the initial warming process of the materials. This is normal and will quickly disappear.

It will not recur after appliance has been used a few more times.

INTERFACE FUNCTIONING

1- Plug the power cord into a 120V AC wall outlet to turn the appliance on. Appliance will beep

and the upper display will show the current water temperature.

2- Press

button to adjust the cooking settings.

2.1 When pressing once, the icon lights up, the default set temperature "54.0C" will appear

on lower display and blink for about 6 seconds. During this time, press

set desired temperature. Each press will adjust the set temperature by increment of

0.5 °C (or 1 °F). Holding down on the button will increase or decrease the temperature faster.

2.2 Once desired temperature is set, press again on

The

icon lights up, the default cooking time "00:00'' will appear on the lower display and

the hours "00:'' blink for 6 seconds. During this time, press

HOUR by increment of 1 hour. Press

HOUR will stop flashing and stay lit, the minutes ":00'' blink for 6 seconds. During this time,

press

buttons to set desired MINUTE by increment of 1 minute. Holding down on

the button will increase or decrease the cooking time faster.

2.3 Use

button to toggle back and forth between the temperature and timer settings.

NOTE

:: : Temperature setting range is 20 °C to 95 °C (68 °F to 203 °F)

:: : Timer setting range is 1 minute up to 99 hours and 59 minutes (00:01 – 99:59)

:: : Different cooking temperatures are required for different types of food. Refer to the "Cooking

Guidelines'' section for more details about suggested cooking times and temperatures.

3- Once desired temperature and timer are set, press

light up indicating that the appliance is in preheating stage and the water starts heating and

circulating to gradually reach the set temperature.

User manual

button to adjust the cooking timer.

buttons to set desired

button again to set desired MINUTE. Previously set

button to start. The blue LED ring will

buttons to