Gamma Luxe Toro 600 RGBW Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Освітлювальне обладнання Gamma Luxe Toro 600 RGBW. Gamma Luxe Toro 600 RGBW 14 сторінок. 600w led spot
Друкувати сторінку
DMX Cables can be 3-pin or 5-pin. These use the same type of data, and in the 5-pin
only pins 1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at
least 110 ohms resistance. Microphone cable is not DMX cable.
Please refer to the diagram below:
For installations where the DMX cable has to run a long distance or is in an electrically
noisy environment, it is recommended to use a DMX terminator. This helps in preventing
corruption of the digital control signal by electrical noise and reflections. The DMX ter-
minator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,
which is then plugged into the output XLR socket of the last fixture in the chain. Please
see illustrations below:
Luxé Toro 600 RGBAL– GAMMA LED Vision
Page 9 of 14