Gamma Led Vision TX4 Spot Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для У центрі уваги Gamma Led Vision TX4 Spot. Gamma Led Vision TX4 Spot 18 сторінок. 150w spot moving head

Друкувати сторінку

Regardless of the rigging option you choose for your TX4-150 Spot, always be sure to

secure your fixture with a safety cable. The fixture providers a built-in rigging point for a

safety cable on the hanging bracket as illustrated above. Be sure to only use the

designated rigging point for the safety cable and never secure a safety cable to a carrying

handle.

∙The moving head is for spot effect for on-site decoration purpose.

So make sure to operate the fixture until it is in normal temperature.

∙This light should be keep away from strong shaking during any transportation or

movement.

∙Don't pull up the light by only the head, or it might cause damages to the mechanical

parts.

∙Don't expose the fixture in overheating, moisture or environments with too much dust

when installing it.

∙Make sure the installation environment is in good safety condition before installing the

fixture.

∙Make sure to put the safety chain and check whether the screws/clamps are screwed

properly when installing the fixture.

∙Make sure the lens are in good condition. It's recommended to replace the units if there

are any damages or severe scratches.

∙Make sure the fixture is operated by qualified personnel who know the fixture before

using.

TX4 Spot – GAMMA LED Vision

Page 5 of 18