Gamma Led Vision TX4 Spot 사용자 설명서 - 페이지 5

{카테고리_이름} Gamma Led Vision TX4 Spot에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Led Vision TX4 Spot 18 페이지. 150w spot moving head

Regardless of the rigging option you choose for your TX4-150 Spot, always be sure to

secure your fixture with a safety cable. The fixture providers a built-in rigging point for a

safety cable on the hanging bracket as illustrated above. Be sure to only use the

designated rigging point for the safety cable and never secure a safety cable to a carrying

handle.

∙The moving head is for spot effect for on-site decoration purpose.

So make sure to operate the fixture until it is in normal temperature.

∙This light should be keep away from strong shaking during any transportation or

movement.

∙Don't pull up the light by only the head, or it might cause damages to the mechanical

parts.

∙Don't expose the fixture in overheating, moisture or environments with too much dust

when installing it.

∙Make sure the installation environment is in good safety condition before installing the

fixture.

∙Make sure to put the safety chain and check whether the screws/clamps are screwed

properly when installing the fixture.

∙Make sure the lens are in good condition. It's recommended to replace the units if there

are any damages or severe scratches.

∙Make sure the fixture is operated by qualified personnel who know the fixture before

using.

TX4 Spot – GAMMA LED Vision

Page 5 of 18