IKEA VALFRI Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Духовка. IKEA VALFRI. IKEA VALFRI 24 сторінки. Built-in oven
Також для IKEA VALFRI: Інструкція з монтажу Посібник з монтажу (12 сторінок), Інструкція з експлуатації (20 сторінок), Інструкція з експлуатації (28 сторінок), Посібник (28 сторінок)
ENGLISH
With the Duration
tions, the appliance deactivates auto-
matically.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to the
off position.
Using the accessories
Warning! Refer to the Safety chapters.
Using the panel shield while grilling with
open oven door
Important! When you use the grilling
function with open oven door it is necessary
to attach the panel shield below the control
panel. It prevents control panel damage
because of heat.
Warning! The shield will be very hot
when you use it while grilling.
Warning! Before you remove the
shield wait until it is cold. If not you can
get burned.
Using the panel shield
1. Open top oven door.
2. Position the shield horizontally.
3. Make sure the text "For grilling use on-
ly" is on top and you can read it.
4. The shield has magnets which let you
attach it below the control panel.
Core temperature sensor
The core temperature sensor measures the
core temperature of the meat.
There are two temperatures to be set:
• The oven temperature
• The core temperature
and End
func-
Cancelling the clock functions
1. Press the Selection button again and
again until the necessary function indi-
cator flashes.
2. Press and hold the button -.
The clock function goes out after some
seconds.
Only use the core temperature sensor
supplied with the appliance, or genu-
ine replacement parts.
Warning! Be careful when you remove
the tip and plug of the core
temperature sensor. The core temperature
sensor is hot. There is a risk of burns.
1. Put the tip of the core temperature sen-
sor into the centre of the meat.
2. Put the core temperature sensor plug
into the socket on the side wall of the
appliance.
3. Push the button
until core temperature sensor indicator
flashes in the display.
4. Press the button + or — to set the core
temperature. You can set a tempera-
ture between 30 °C and 99 °C.
Refer to the table.
5. Set the oven function and the oven tem-
perature.
6. When the meat is at the set core tem-
perature, an acoustic signal sounds.
Press a button to stop the signal.
7. Deactivate the appliance.
8. Remove the core temperature sensor
plug from the socket . Remove the meat
from the appliance.
Suggested core temperatures
50 °C
60 °C
70 °C
If the meat is not cooked to your satisfac-
tion, do the above steps again and set a
higher core temperature.
12
again and again
Rare
Medium
Well done