IKEA VALFRI 사용자 설명서 - 페이지 12

{카테고리_이름} IKEA VALFRI에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA VALFRI 24 페이지. Built-in oven
IKEA VALFRI에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 사용 설명서 (20 페이지), 사용 설명서 (28 페이지), 매뉴얼 (28 페이지)

페이지 인쇄

ENGLISH

With the Duration

tions, the appliance deactivates auto-

matically.

4. Press a button to stop the signal.

5. Turn the knob for the oven functions

and the knob for the temperature to the

off position.

Using the accessories

Warning! Refer to the Safety chapters.

Using the panel shield while grilling with

open oven door

Important! When you use the grilling

function with open oven door it is necessary

to attach the panel shield below the control

panel. It prevents control panel damage

because of heat.

Warning! The shield will be very hot

when you use it while grilling.

Warning! Before you remove the

shield wait until it is cold. If not you can

get burned.

Using the panel shield

1. Open top oven door.

2. Position the shield horizontally.

3. Make sure the text "For grilling use on-

ly" is on top and you can read it.

4. The shield has magnets which let you

attach it below the control panel.

Core temperature sensor

The core temperature sensor measures the

core temperature of the meat.

There are two temperatures to be set:

• The oven temperature

• The core temperature

and End

func-

Cancelling the clock functions

1. Press the Selection button again and

again until the necessary function indi-

cator flashes.

2. Press and hold the button -.

The clock function goes out after some

seconds.

Only use the core temperature sensor

supplied with the appliance, or genu-

ine replacement parts.

Warning! Be careful when you remove

the tip and plug of the core

temperature sensor. The core temperature

sensor is hot. There is a risk of burns.

1. Put the tip of the core temperature sen-

sor into the centre of the meat.

2. Put the core temperature sensor plug

into the socket on the side wall of the

appliance.

3. Push the button

until core temperature sensor indicator

flashes in the display.

4. Press the button + or — to set the core

temperature. You can set a tempera-

ture between 30 °C and 99 °C.

Refer to the table.

5. Set the oven function and the oven tem-

perature.

6. When the meat is at the set core tem-

perature, an acoustic signal sounds.

Press a button to stop the signal.

7. Deactivate the appliance.

8. Remove the core temperature sensor

plug from the socket . Remove the meat

from the appliance.

Suggested core temperatures

50 °C

60 °C

70 °C

If the meat is not cooked to your satisfac-

tion, do the above steps again and set a

higher core temperature.

again and again

Rare

Medium

Well done