IKEA 302-371-38 Посібник - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник для Варильна поверхня IKEA 302-371-38. IKEA 302-371-38 44 сторінки.
Також для IKEA 302-371-38: Посібник (44 сторінок)
Друкувати сторінку
ENGLISH
If there is a problem with
electrical supply and the
appliance deactivates it does not
keep previous settings.
Hints and tips
Noises during operation
When a cooking zone is switched
on, it may hum briefly. This is a
characteristic of all ceramic glass
cooking zones and does not
impair either the function or the
life of the appliance.
Cookware for induction cooking zones
Use the induction cooking zones
with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multi-
layer (with correct mark from a
manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob
if ...
• ... some water boils very quickly on a
zone set to the highest heat setting...
Care and cleaning
General information
Warning! Switch the appliance
off and let it cool down before
you clean it.
Warning! For safety reasons, do
not clean the appliance with
steam blasters or high-pressure
cleaners.
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must
be as thick and flat as possible.
Cookware sizes
Induction cooking zones adapt
automatically to the size of the bottom of
the cookware. But, it must have a minimum
diameter depending on the size of the
cooking zone.
Cooking zone
Middle rear cooking
zone
Middle front cook-
ing zone
Warning! Sharp objects and
abrasive cleaning agents will
damage the appliance. Clean
the appliance and remove the
residues with water and washing
up liquid after each use. Remove
also the remnants of the cleaning
agents!
12
Minimum diameter
of cookware base
[mm]
145
145