HIKVISION DS-2CE16D8T-IT3 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для ВІДЕОРЕЄСТРАТОР HIKVISION DS-2CE16D8T-IT3. HIKVISION DS-2CE16D8T-IT3 15 сторінок. Turret cameras turbo hd d8t series
Також для HIKVISION DS-2CE16D8T-IT3: Посібник із швидкого старту (17 сторінок), Посібник користувача (15 сторінок)
Друкувати сторінку
Figure 2-8 Fix the Inclined Base Body
6. Combine inclined base's cover with its body with
supplied screws.
7. Repeat steps 6 to 9 of the 2.1.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.
Figure 2-9 Fix the Camera to the Inclined Base
2.2 Installation of Type II Camera
Before you start:
Both wall mounting and ceiling mounting are suitable
for the turret camera. Ceiling mounting will be taken as
an example in this section. You can take steps of ceiling
mounting as the reference, when adopting the wall
mounting.
Steps:
1. Disassemble the turret camera by rotating the
camera to align the notch to the clip plate, as shown
in the Figure 2-10.
Figure 2-10 Disassemble the Camera
2. Pry the mounting base to remove the mounting
base from the camera body.
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Figure 2-11 Drill Template