HIKVISION DS-2CE56D8T-IT3E Посібник із швидкого старту - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для ВІДЕОРЕЄСТРАТОР HIKVISION DS-2CE56D8T-IT3E. HIKVISION DS-2CE56D8T-IT3E 17 сторінок. Bullet & turret camera
Також для HIKVISION DS-2CE56D8T-IT3E: Посібник користувача (15 сторінок), Посібник користувача (17 сторінок)

HIKVISION DS-2CE56D8T-IT3E Посібник із швидкого старту
3.5 User Logout, Shutdown and Reboot
Purpose
You can log out of the system, shut down, or reboot the device on your demands.
Step 1 Go to Menu > Shutdown.
Step 2 Click Logout, Shutdown, or Reboot.
After you have logged out of the system, menu
operation on the screen is invalid. It is required to enter
a user name and password to unlock the system.

3.6 Viewing Signal Input Status

Purpose
The analog signal inputs (Turbo HD, AHD, HDCVI, CVBS) and IP signal input can be recognized and connected
automatically. For some series of DVR, you can configure 5 MP long distance transmission on the Signal Input
Status interface. For other models, there is no Signal Input Status interface.
The following steps are about 5 MP long distance transmission configuration for the supported DVR.
Step 1 Go to Menu > Camera > Signal Input Status.
Step 2 Click
to enter the 5 MP Long Distance
Transmission Settings interface.
Step 3 Check the channel(s) to enable 5 MP long
distance transmission.
Step 4 Click Apply to save the settings and OK to
return to the Signal Input Status interface.
Digital Video Recorder Quick Start Guide
Figure 3-5 Signal Input Status
Figure 3-6 5 MP Long Distance Transmission Settings
9
Figure 3-4 Logout