AFS Z-Line Інструкція з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Стелажі та підставки AFS Z-Line. AFS Z-Line 4 сторінки. Standard boltless rack

Друкувати сторінку

Attach the remaining shelf supports at the desired

shelf levels, making

sure that all shelf

supports are

completely

seated in the

upright slots.

NOTE: If you

have purchased

additional shelf

levels, the shelf

supports for the

extra levels may

also be inserted

at this time.

Attach shelf

reinforcements

(Ref. No. 4) at

each level by

inserting the

keyhole slots

on the reinforce-

ment over the

rivets on the

supports and

tapping them

firmly into place,

as shown above.

NOTE:

Recommended

number of

reinforcements

per shelf are as

follows:

48" w = 1 reinforcement

72" w = 2 reinforcements

96" w = 3 reinforcements

American Filing Solutions P.O. Box 891719, Temecula, CA 92589 Toll Free: (888) 891-1970 x 8958 Fax: (888) 891-9970 Email: [email protected] www.FilingToday.com

If particleboard decking (Ref. No. 5) was

ordered, place the

decking on each

shelving level.

The decking should

fit flat on top of the

shelf supports and

reinforcements.

NOTE: If you

ordered wire

decking, it will fit

onto the unit in

the same way as

described above.

If you have

purchased a

single unit, your

shelving unit is

now complete and

ready to use.

For adder units,

see step 10.

10.

If joining more than

one unit together, your

original unit should have been

assembled with ZTP uprights on one end, as

described in step 5. Simply

continue adding shelf

supports and uprights

to complete your

additional units.