IKEA SKINANDE Посібник - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник для Посудомийна машина IKEA SKINANDE. IKEA SKINANDE 24 сторінки. Dishwasher
Також для IKEA SKINANDE: Посібник користувача (24 сторінок), Посібник користувача (48 сторінок), Посібник користувача (4 сторінок), Посібник (48 сторінок), Посібник (16 сторінок), Посібник (32 сторінок), Інструкція з монтажу Посібник з монтажу (16 сторінок), Посібник (28 сторінок), Посібник (28 сторінок), Посібник (48 сторінок)

Друкувати сторінку

1. Troubleshooting

ENGLISH

Problem and alarm code

The appliance does not fill with water.

The display shows

The appliance does not drain the wa-

ter.

The display shows

The anti-flood device is on.

The display shows

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

The washing and drying results are not satisfactory

Problem

There are whitish streaks or

bluish layers on glasses and

dishes.

There are stains and dry wa-

ter drops on glasses and

dishes.

The dishes are wet.

Refer to "Hints and tips" for

other possible causes.

• Make sure that the water tap is open.

• Make sure that the pressure of the water sup-

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not

• Make sure that the inlet hose has no kinks or

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or

• Close the water tap and contact an Authorised

• The release quantity of rinse aid is too much. Adjust

the rinse aid selector to a lower position.

• The quantity of detergent is too much.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid selector to a higher position.

• The quality of the rinse aid can be the cause.

• The programme does not have a drying phase or has

a drying phase with low temperature.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

• The quality of the multi-tablets can be the cause. Try a

different brand or activate the rinse aid dispenser and

use rinse aid and multi-tablets together.

Possible solution

ply is not too low. For this information, contact

your local water authority.

clogged. Clean the filter.

bends.

Service Centre.

For alarm codes not described in the table,

contact an Authorised Service Centre.

Possible solution