Makita 4340CT Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 4340CT. Makita 4340CT 17 сторінок. Jig saw
Також для Makita 4340CT: Технічні характеристики (2 сторінок), Інструкція з експлуатації (13 сторінок), Технічна інформація (16 сторінок)
![Makita 4340CT Інструкція з експлуатації](/uploads/products/server2/2092053/2092053.png)
FUNCTIONAL
DESCRIPTION
1
1. Cutting action changing lever
1
1. Switch trigger
2. Lock button
1. Speed adjusting dial
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Selecting the cutting action
001906
This tool can be operated with an orbital or a straight line (up and down) cut-
ting action. The orbital cutting action thrusts the blade forward on the cutting
stroke and greatly increases cutting speed.
To change the cutting action, just turn the cutting action changing lever to the
desired cutting action position. Refer to the table below to select the cutting
action.
Position
Cutting action
0
Straight line cutting action
I
Small orbit cutting action
II
Medium orbit cutting action
Large orbit cutting action
III
Switch action
001907
2
CAUTION:
•
Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release the switch trigger to
stop. For continuous operation, pull the switch trigger and then push in the
lock button. To stop the tool from the locked position, pull the switch trigger
fully, then release it.
Speed adjusting dial
For 4340CT, 4340FCT
001908
The tool speed can be infinitely adjusted between 800 and 2,800 strokes per
minute by turning the adjusting dial. Higher speed is obtained when the dial is
turned in the direction of number 5; lower speed is obtained when it is turned
in the direction of number 1.
1
Refer to the table to select the proper speed for the workpiece to be cut. How-
ever, the appropriate speed may differ with the type or thickness of the work-
piece. In general, higher speeds will allow you to cut workpieces faster but the
service life of the blade will be reduced.
Applications
For cutting mild steel, stainless steel and plastics.
For clean cuts in wood and plywood.
For cutting mild steel, aluminum and hard wood.
For cutting wood and plywood.
For fast cutting in aluminum and mild steel.
For fast cutting in wood and plywood.
001955
5