Avantco Equipment MX30 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Міксер Avantco Equipment MX30. Avantco Equipment MX30 15 сторінок. Gear driven 30 qt. commercial mixer
Також для Avantco Equipment MX30: Посібник користувача (15 сторінок)
Друкувати сторінку
User Manual
STANDARD ACCESSORIES
Standard Accessories
FIGURE 10
Item
Description
1
Flat Beater
2
Dough Hook
3
Wire Whip
4
Bowl
NOTES:
• Any agitator is easily installed by simply raising it onto the mixing axle, and the rotating it clockwise on the shaft
until it locks into place. To remove, raise the agitator on the shaft until it clears the lock and then rotate counter-
clockwise and lower.
• All of the accessories are precisely fitted to the bowl, have rounded corners, and are easily removed for cleaning.
Unpacking the Equipment
12
and Initial Setup
Carefully remove crating or packaging materials from the equipment. Models shipped on pallets are bolted to the
pallet. Bolts must be removed to safely separate the equipment from the pallet. Place the equipment on a flat surface
with sufficient space around the mixer to allow for safe cleaning and service. Plug only into grounded electrical outlets
matching the nameplate rated voltage. Do not use an extension cord with this equipment. Do not plug this equipment
into a power strip or multi-outlet power cord.
INSTALLATION:
1. Read this manual in its entirety prior to installation and operation. DO NOT install if you do not understand everything
in this manual.
2. Select a location for the mixer keeping in mind that:
• Surface must be level
• Location should be accessible for maintenance and service
• Location should offer adequate clearance for installing and removing agitators, bowls or attachments
• Location offers sufficient space for adding ingredients to the mixer
• Make sure that the rear ventilation outlet of the mixer is not blocked
4
STANDARD ACCESSORIES
ITEM
DESCRIPTION
QTY
1
Spatula
1
2
Dough Hook
1
3
Wisk
1
4
Bowl
1
NOTES:
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
SPANISH:
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
STANDARD ACCESSORIES
FIGURE 10
STANDARD ACCESSORIES
FIGURE 10
FIGURE 10
FIGURE 10
OPERATION INSTRUCTION
ITEM
DESCRIPTION
1
Spatula
2
Dough Hook
Please ensure power supply matches your machine
3
Wisk
Please ensure power supply matches your machine.
4
Bowl
NEMA 5015P
110V
NOTES:
110V
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
OFF
FOR CHANGING THE SPEED: Please stop machine first
until into place. To remove, raise the
agitator on the shaft until it clears the
before changing speed in order to avoid damage to the gear box
lock and then rotate counter-clockwise
FOR CHANGING THE SPEED: Please stop machine first
and lower.
before changing speed in order to avoid damage to the gear bo
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
MIXING: According to the different mixing material.
Choose the different mixing devicews and speed.
SPANISH:
Qty
• Any agitator is easily installed by sim-
MIXING: According to the different mixing material.
ply raising it onto the mixing axle, and
Choose the different mixing devicews and
the rotating it clockwise on the shaft
1
until into place. To remove, raise the
agitator on the shaft until it clears the
A. Be suitable for mix and stir batter, eggs and work with
1
lock and then rotate counter-clockwise
in speed speed, working time isless than 15 minutes.
and lower.
A
A. Be suitable for mix and stir batter, eggs and work with
1
• All of tools are precisely fitted to the
in speed speed, working time isless than 15 minutes
bowl, rounded corners and easily
1
removable for cleaning.
B. Be suitable for mix and stir stuffing and raw material, and
B
12
work in middle speed, working time is less than 20 mins.
B. Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20
C. Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
C
C. Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is
www.AvantcoEquipment.com
OPERATION INSTR
Please ensure power supply m
Please ensure power supply m
NEMA 5015P
110V
110V
OFF
FOR CHANGING THE SPEED:
before changing speed in order t
FOR CHANGING THE SPEED:
before changing speed in order t
MIXING: According to the diff
QTY
Choose the different mixing d
1
MIXING: According to the diff
1
Choose the different mixing d
1
1
A. Be suitable for mix and stir
in speed speed, working time
A
A. Be suitable for mix and stir
ITEM
DESCRIPTION
in speed speed, working time
1
Spatula
B. Be suitable for mix and stir
ITEM
DESCRIPTION
B
work in middle speed, working
2
Dough Hook
ITEM
DESCRIPTION
1
Spatula
B. Be suitable for mix and stir
3
Wisk
work in middle speed, working
1
Spatula
2
Dough Hook
C. Middle position is suitable fo
4
Bowl
2
Dough Hook
3
Wisk
is less than 30 minutes. Flour/
C
C. Middle position is suitable fo
3
Wisk
4
Bowl
is less than 30 minutes. Flour/
NOTES:
4
speed.
Bowl
• Any agitator is easily installed by si
NOTES:
ply raising it onto the mixing axle, a
• Any agitator is easily installed by si
the rotating it clockwise on the sh
NOTES:
ply raising it onto the mixing axle, a
until into place. To remove, raise t
• Any agitator is easily installed by si
the rotating it clockwise on the sh
agitator on the shaft until it clears t
ply raising it onto the mixing axle, a
until into place. To remove, raise t
lock and then rotate counter-clockwi
the rotating it clockwise on the sh
agitator on the shaft until it clears t
and lower.
until into place. To remove, raise t
lock and then rotate counter-clockwi
agitator on the shaft until it clears t
and lower.
mins.
• All of tools are precisely fitted to t
lock and then rotate counter-clockwi
bowl, rounded corners and eas
and lower.
• All of tools are precisely fitted to t
removable for cleaning.
bowl, rounded corners and eas
• All of tools are precisely fitted to t
SPANISH:
removable for cleaning.
40%-50%.
bowl, rounded corners and eas
• Any agitator is easily installed by si
removable for cleaning.
SPANISH:
ply raising it onto the mixing axle, a
• Any agitator is easily installed by si
the rotating it clockwise on the sh
SPANISH:
ply raising it onto the mixing axle, a
until into place. To remove, raise t
• Any agitator is easily installed by si
the rotating it clockwise on the sh
agitator on the shaft until it clears t
ply raising it onto the mixing axle, a
until into place. To remove, raise t
lock and then rotate counter-clockwi
the rotating it clockwise on the sh
agitator on the shaft until it clears t
and lower.
until into place. To remove, raise t
lock and then rotate counter-clockwi
agitator on the shaft until it clears t
13
and lower.
• All of tools are precisely fitted to t
lock and then rotate counter-clockwi
bowl, rounded corners and eas
and lower.
• All of tools are precisely fitted to t
removable for cleaning.
bowl, rounded corners and eas
• All of tools are precisely fitted to t
removable for cleaning.
12
bowl, rounded corners and eas
removable for cleaning.
12
12
QT
1
QTY
1
QTY
1
1
1
1
1
1
1
1
1
1
13