Makita 4351FCT Технічна інформація - Сторінка 9

Переглянути онлайн або завантажити pdf Технічна інформація для Електроінструмент Makita 4351FCT. Makita 4351FCT 15 сторінок. Jig saw
Також для Makita 4351FCT: Технічні характеристики (2 сторінок), Розбивка на частини (3 сторінок), Інструкція з експлуатації (13 сторінок), Інструкція з експлуатації (13 сторінок), Інструкція з експлуатації (9 сторінок)

Друкувати сторінку

epair

[10] Assembling parts in Gear housing

1. Pass the shaft of Gear housing through Flat washer 8. (Fig. 28)

2. After assembling Seal plate to Push plate, pass the shaft of Gear housing through Push plate with Seal plate. (Fig. 29)

3. Lubricate the parts with referring to [1] Lubrication in page 2.

4. Pass the shaft of Gear housing through Gear complete and Balance plate. (Fig. 30)

5. Assemble Crank complete to Gear housing. Push down Crank complete while turning it until the groove on

shaft of Gear housing can be seen. (Fig. 31)

6. While locking crank complete with 1R235, fasten Crank complete with two M4x12 Hex socket head bolts with

adhesive. (Fig. 32)

Note: Do not fasten with the used M4x12 Hex socket head bolts. The fresh M4x12 Hex socket head bolts with

adhesive have to be used. The fastening torque of these bolts has to be 2.4 - 3.5 N.m.

7. Install Retaining ring S-8 to the groove on the shaft of Gear housing to secure the components. (Fig. 33)

Fig. 28

Shaft of Gear housing

Flat washer

Fig. 31

Groove on the shaft of Gear housing

for Retaining ring S-8

Crank complete

Press down Crank complete until the groove

on the shaft of Gear housing can be seen.

Fig. 33

Retaining ring S-8

Fig. 29

Shaft of Gear housing

Push plate

Seal plate

Gear housing

Fig. 32

1R235

Balance plate

Retaining ring S-8

Crank complete

Balance plate

Gear complete

Push plate

Flat washer 8

Seal plate

Fig. 30

Balance

Shaft of Gear housing

plate

Gear complete

M4x12 Hex socket head bolts

Crank complete

P 9 / 15