Makita 4351FCT Teknik Bilgiler - Sayfa 9
Elektrikli Alet Makita 4351FCT için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Makita 4351FCT 15 sayfaları. Jig saw
Ayrıca Makita 4351FCT için: Teknik Özellikler (2 sayfalar), Parça Dağılımı (3 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (9 sayfalar)
Sayfayı Yazdır
R
epair
[10] Assembling parts in Gear housing
1. Pass the shaft of Gear housing through Flat washer 8. (Fig. 28)
2. After assembling Seal plate to Push plate, pass the shaft of Gear housing through Push plate with Seal plate. (Fig. 29)
3. Lubricate the parts with referring to [1] Lubrication in page 2.
4. Pass the shaft of Gear housing through Gear complete and Balance plate. (Fig. 30)
5. Assemble Crank complete to Gear housing. Push down Crank complete while turning it until the groove on
shaft of Gear housing can be seen. (Fig. 31)
6. While locking crank complete with 1R235, fasten Crank complete with two M4x12 Hex socket head bolts with
adhesive. (Fig. 32)
Note: Do not fasten with the used M4x12 Hex socket head bolts. The fresh M4x12 Hex socket head bolts with
adhesive have to be used. The fastening torque of these bolts has to be 2.4 - 3.5 N.m.
7. Install Retaining ring S-8 to the groove on the shaft of Gear housing to secure the components. (Fig. 33)
Fig. 28
Shaft of Gear housing
Flat washer
8
Fig. 31
Groove on the shaft of Gear housing
for Retaining ring S-8
Crank complete
Press down Crank complete until the groove
on the shaft of Gear housing can be seen.
Fig. 33
Retaining ring S-8
Fig. 29
Shaft of Gear housing
Push plate
Seal plate
Gear housing
Fig. 32
1R235
Balance plate
Retaining ring S-8
Crank complete
Balance plate
Gear complete
Push plate
Flat washer 8
Seal plate
Fig. 30
Balance
Shaft of Gear housing
plate
Gear complete
M4x12 Hex socket head bolts
Crank complete
P 9 / 15