Bernina Record 830 Робочий зошит - Сторінка 10

Переглянути онлайн або завантажити pdf Робочий зошит для Аксесуари Bernina Record 830. Bernina Record 830 16 сторінок. Workbook 3 creative options
Також для Bernina Record 830: Оновлення програмного забезпечення (14 сторінок), Брошура (2 сторінок), Інструкції та поради (4 сторінок)

Firm woven fabric, 4" x 6" and

Fabric:

Heavyweight tear-away stabilizer, 4" x 6"

80/12 Universal

Needle:

30 wt. cotton embroidery

Thread:

center

Needle Position:

BERNINA Presser Foot:

This exercise, for the BERNINA 830 only, features an all-over

design created by selecting one stitch and changing directions

as you sew.

Twisted Scrolls

Place stabilizer behind fabric; mark parallel guide lines about 1"

apart on the fabric as a reference for guiding during the stitching

process.

Select 225º on the compass, Pattern Repeat 1x and Needle Stop

Down. Stitch one stitch pattern and stop; do not remove

the fabric.

Select 135º on the compass, leaving Pattern Repeat 1x and Nee-

dle Stop Down engaged. Stitch one stitch pattern and stop; do not

remove the fabric.

Stitch from one end of the fabric to the other, guiding fabric

so that the "+" stays parallel and perpendicular to the presser

foot.

Stitch additional rows of this stitch combination, covering the

surface of the fabric.

Note: Some adjustments may be necessary depending on the fabric,

thread, and stabilizer used to create the stitch sample.

Optional: Create a 4-sided motif by selecting 315º and 45º as

the third and fourth sides.

7/27/11

All-Over Directional Stitching

BERNINA 830 only

Sideways Motion Foot #40C

Do you know how to:

▪ Change directions in 45º increments

when Multi-Directional stitching?