Bernina Record 830 Робочий зошит - Сторінка 11
Переглянути онлайн або завантажити pdf Робочий зошит для Аксесуари Bernina Record 830. Bernina Record 830 16 сторінок. Workbook 3 creative options
Також для Bernina Record 830: Оновлення програмного забезпечення (14 сторінок), Брошура (2 сторінок), Інструкції та поради (4 сторінок)
Друкувати сторінку
- 1. Table of Contents
- 2. Setup Program
- 3. Stitch Collage
- 4. Long Stitch
- 5. Tapering Stitches
- 6. Multi-Directional Stitching
- 7. Free-Form Directional Stitching
- 8. All-Over Directional Stitching: Twisted Scrolls (BERNINA 830 Only)
- 9. All-Over Directional Stitching: Trailing Tulip Vines (Artista 730 Only)
- 10. All-Over Directional Stitching: Trailing Tulip Vines (BERNINA 830 Only)
- 11. Monograms
- 12. Artista 640 Functions
- 13. Artista 730 Functions
- 14. BERNINA 820 Functions
Firm woven fabric, 4" x 8" and
Fabric:
Heavyweight tear-away stabilizer, 4" x 8"
80/12 Universal
Needle:
30 wt. cotton embroidery
Thread:
center
Needle Position:
BERNINA Presser Foot:
This exercise has two decorative stitches programmed into memory
and stitched in rows. The tulip/leaf designs are connected by direc-
tional straight stitches to vary their positions as they are stitched.
The artista 730 requires the programming of the connecting stitches
(Straight stitch #39) but the BERNINA 830 will add the stitches
automatically once you select the Connecting stitches icon.
Trailing Tulip Vines
Place stabilizer behind fabric; mark parallel guide lines about 1" apart
on the fabric as a reference for guiding during the stitching process.
artista 730
Program the following stitches in Combi Mode:
- stitch #137; Up/Down Mirror Image
- stitch #145
- stitch #39, direction 6 - 1x
- stitch #145; Up/Down Mirror Image
- stitch #137
- stitch #39, direction 10 - 1x
- stitch #145; Up/Down Mirror Image
- stitch #137
- stitch #39, direction 6 - 1x
- stitch #137; Up/Down Mirror Image
- stitch #145
- stitch #39, direction 10 - 1x
Save the combination.
Stitch from one end of the stabilized fabric to the other, using
fingertip guiding to keep the presser foot parallel to the
drawn guidelines.
Stitch additional rows of this stitch combination, scrolling
through the stitches to start at different points.
Note: Some adjustments may be necessary depending
on the fabric, thread, and stabilizer used to create the
stitch sample After stitching the first line, examine the
results and make adjustments as necessary.
7/27/11
All-Over Directional Stitching
artista 730 only
Sideways Motion Foot #40C
Do you know how to:
▪ Add Directional stitches to a stitch
combination?
11