AIRFUN 12525 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Засоби особистої гігієни AIRFUN 12525. AIRFUN 12525 8 сторінок. Portable chair for recovery
Друкувати сторінку
4.
SET-UP
4.1 Take the product outside the cardboard packaging and check everything for possible transport
damage.
4.2 Pick the right location for the Recovery chair. To prevent damage, make sure that the surface is clean
and there is no debris or other obstacles. If you are using Recovery chair outside, always
use a ground sheet under the chair.
4.3 Take the Recovery chair out of the carrying bag and make sure it is unrolled enough to reach
the valve. Pay attention to how it is folded so that you can do it in the same way once you want
to store it.
4.4 Chair inflation:
1.
Prior to connection to the mains supply, check that the voltage corresponds with that
written on the plate.
2.
Prior to start inflating, check that the safety valve is closed.
3.
Fit the tube on the inflation side of the blower (OUT). Check that the ON/OFF switch
is set to (0).
4.
Open (unscrew) the valve cap of the chair, push button into the ''OUT'' position
and connect the blower's tube into the valve.
Important: do not use any force!
5.
Plug the cable into the mains supply and turn the switch to the (I) position, the inflation will
start. When the maximum pressure is reached, switch off the blower and take out the tube.
6.
After inflation tighten the valve cap (clockwise). Only the valve's cap can ensure final
air tightness.
4.5 You can also check and download set-up video here:
4.6 Enjoy the product!