AIRFUN 12525 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Produk Perawatan Pribadi AIRFUN 12525. AIRFUN 12525 8 halaman. Portable chair for recovery

Halaman Cetak

SET-UP

4.1 Take the product outside the cardboard packaging and check everything for possible transport

damage.

4.2 Pick the right location for the Recovery chair. To prevent damage, make sure that the surface is clean

and there is no debris or other obstacles. If you are using Recovery chair outside, always

use a ground sheet under the chair.

4.3 Take the Recovery chair out of the carrying bag and make sure it is unrolled enough to reach

the valve. Pay attention to how it is folded so that you can do it in the same way once you want

to store it.

4.4 Chair inflation:

Prior to connection to the mains supply, check that the voltage corresponds with that

written on the plate.

Prior to start inflating, check that the safety valve is closed.

Fit the tube on the inflation side of the blower (OUT). Check that the ON/OFF switch

is set to (0).

Open (unscrew) the valve cap of the chair, push button into the ''OUT'' position

and connect the blower's tube into the valve.

Important: do not use any force!

Plug the cable into the mains supply and turn the switch to the (I) position, the inflation will

start. When the maximum pressure is reached, switch off the blower and take out the tube.

After inflation tighten the valve cap (clockwise). Only the valve's cap can ensure final

air tightness.

4.5 You can also check and download set-up video here:

4.6 Enjoy the product!