Airgain AirgainConnect AC-HPUE Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Бездротова точка доступу Airgain AirgainConnect AC-HPUE. Airgain AirgainConnect AC-HPUE 2 сторінки.

Друкувати сторінку

LED Status Indicator

State

Indicator Color

Power off & sleeping

Off

Booting up

Blue

No SIM card

Red

No signal

Red/Green/Blue

No USB connection

Red

Connecting

Green blink

Connected

Green

6. When power is applied, it takes at least 60 seconds for the device to initialize and connect.

When activating a new SIM, allow 5 minutes.

7. A solid green LED indication means it is connected and ready.

8. Make sure you are in range of cellular service.

9. Most routers and laptops are configured for DHCP to get an IP address from the network.

10. If the ethernet port on your device is set to PPPOE or static IP address, change it to DHCP.

11. Refer to the installation guide if you need more information.

https://airgain.com/wp-content/uploads/2022/09/AirgainConnect_InstalIationGuide.pdf

AirgainConnect

AC-HPUE™ Quick Start Guide

Description

The LED is off when the power is off or the device is

sleeping

Solid blue while booting up

Solid red after bootup when there is no valid SIM card

Blinking red after bootup when there is no cellular

coverage signal, followed by blinking green, followed

by reboot solid blue

Blinking red after bootup when there is no connection

to the antenna-modem

Blinking green while connecting to the cellular

network

Solid green when connected to the cellular network

Installation Guide