KitchenAid YKFEG500EBS Інструкція з монтажу Посібник з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Діапазони KitchenAid YKFEG500EBS. KitchenAid YKFEG500EBS 16 сторінок. Freestanding
Також для KitchenAid YKFEG500EBS: Посібник із швидкого старту (2 сторінок), Посібник користувача (18 сторінок)
Друкувати сторінку
Power Supply Cord
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Disconnect power.
2. Remove the terminal block cover screws located on the back
of the range. Pull cover down and toward you to remove
cover from range.
A. Mounting tabs (2 - each side)
B. Terminal block cover
C. Hex-head screws
3. Remove plastic tag holding three 10-32 hex nuts from the
middle post of the terminal block.
4. Add strain relief.
8
Electrical Connection
A
B
C
Direct Wire
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Style 1: Power Supply Cord Strain Relief
■
Remove the knockout for the power supply cord.
■
Assemble a UL listed strain relief in the opening.
A. UL listed strain relief
■
Tighten strain relief screw against the power supply cord.
A