Lexmark C925 Посібник - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник для Принтер Lexmark C925. Lexmark C925 14 сторінок. Setup sheet
Також для Lexmark C925: Посібник адміністратора (20 сторінок), Посібник адміністратора (12 сторінок), Посібник з підключення (7 сторінок), Примітка до випуску (4 сторінок), Посібник адміністратора (13 сторінок), Посібник з технічного обслуговування (15 сторінок), Посібник адміністратора (12 сторінок), Короткий довідник (10 сторінок), Паперовий посібник (3 сторінок), Карта меню (2 сторінок), Посібник з переїзду (2 сторінок), Посібник з постачання (2 сторінок), Інформаційний посібник (1 сторінок), Посібник з дефектів друку (1 сторінок), Встановлення (2 сторінок), Короткий довідник (12 сторінок), Сервісне навчання (18 сторінок)

Lexmark C925 Посібник
M
AKE SURE THERE IS NO WORN
Replace the worn, defective, or empty toner cartridge.
C
LEAR THE PAPER PATH AROUND THE TONER CARTRIDGE
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
Clear any paper you see or clean any visible toner from the paper path. If the problem persists, then contact Customer Support.

Streaked vertical lines appear on prints

ABCDE
ABCDE
ABCDE
Try one or more of the following:
S
ELECT ANOTHER TRAY OR FEEDER
From the printer control panel Paper menu, select Default Source
For Windows users, select the paper source from Print Properties.
For Macintosh users, select the paper source from the Print dialog and pop-up menus.
M
AKE SURE THERE IS NO WORN
Replace the worn, defective, or empty toner cartridge.
C
LEAR THE PAPER PATH AROUND THE TONER CARTRIDGE
Check the paper path around the toner cartridge.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
Clear any paper you see.
M
AKE SURE THERE IS NO TONER IN THE PAPER PATH
,
,
DEFECTIVE
OR EMPTY TONER CARTRIDGE
,
,
DEFECTIVE
OR EMPTY TONER CARTRIDGE
Print quality guide
Page 9 of 13