2. Assembly
Fitting the blower tube:
2
3
3. Initial operation
Charging the battery:
6
5
5
9
8
18
DANGER! Risk of physical injury!
The motor must be stopped and the impeller blades
no longer turning to avoid serious injury from the
rotating blades.
v S top the unit and remove battery before attempting
to install or remove the blower tube.
1
1. Align the grooves on the blower tube
blower outlet
2. Push the blower tube onto the blower outlet until it snaps into
place; tube is secured to blower by tube release button
3. To remove the blower tube, press the tube release button
while pulling on tube.
WARNING!
Overvoltage damages batteries and the battery
charger.
v E nsure the correct mains voltage.
4
Before using for the first time, the battery must be fully charged.
Charging time (for uncharged battery) see 9. Technical Data.
The lithium-ion battery can be charged in any state of charge,
and the charging process can be interrupted at any time without
harming the battery (no memory effect).
1. Depress both locking buttons
the battery holder
2. Plug the plug of the charger cable
3. Plug battery charger
Charging indicator lamp
once per second: Battery is being charged.
Charging indicator lamp
Battery is fully charged.
(For charging time, see 9. Technical Data.)
Check the charge status regularly while charging.
Battery charging status indicator during charging:
7
100 % charged
66 – 99 % charged
33 – 65 % charged
0 – 32 % charged
4. Once completely charged, disconnect the battery
battery charger
8
charger
5. Slide the battery
it audibly engages.
2
.
4
and remove the battery
6
on the handle.
8
into a mains socket.
9
at the charger unit flashes green
9
at the charger unit is lit green:
L1, L2 and L3 lit.
L1 and L2 lit, L3 flashing.
L1 lit, L2 flashing.
L1 flashing.
8
. Disconnect the battery
first, then unplug the battery charger
5
onto the battery holder
1
with the grooves on the
3
5
7
5
into the battery
.
5
from the
5
from the battery
8
.
6
on the handle until
.
3
from
Друкувати сторінку