Align-Pilates M8-Pro Reformer Інструкція з монтажу та посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з монтажу та посібник користувача для Еліптичний тренажер Align-Pilates M8-Pro Reformer. Align-Pilates M8-Pro Reformer 12 сторінок.

Друкувати сторінку

2. Unpacking the second outer box:

a. Carefully take off the lid of the carriage bed box and remove the bubble wrap - do not use a knife as you may

cut the vinyl - (you will notice there is a second box, please remove and put aside for use later in assembly) see

Fig.12.

b. We recommend 2 people remove the carriage bed from the box. It is best to familiarise yourself with the

underneath of the carriage at this point, so you are familiar with the functionality, including the side wheel

adjustment, spring attachment system and carriage anti-tipping device (Fig.13).

c. You will need to insert the carriage bed (2 people required) at an angle so the anti-tipping system does not hit

the runner (please bear this in mind when removing the carriage in future - you can only lift up one side) . You will

also need to ensure the bed is correctly orientated with the springs towards the padded foot bar prior to insert-

ing (Fig.14).

d. It's now time to open the smaller box from the second carton, which contains the maple rope risers, the

shoulder rests, pulleys, ropes, handles and bolts for the foot bar(Fig.15).

2x maple

rope risers

2x silent

double loop

straps

Fig.12

Fig.14

2x shoulder

rests

Fig.13

2x silent

rope pulleys

2x silent

ropes

Fig.15