Garmin GHC 20 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Морське обладнання Garmin GHC 20. Garmin GHC 20 13 сторінок.
Також для Garmin GHC 20: Посібник користувача (8 сторінок)

Друкувати сторінку

Heading Screen

The heading screen displays the status of the autopilot and the heading screen.

Standby Mode

CAUTION

The autopilot does not steer the boat in standby mode. You are responsible for

controlling the helm, when in standby mode.

In standby mode, you can engage the autopilot, adjust settings, or specify the

transmission direction (page 2) of your boat (forward or reverse) by using the

soft keys.

"Standby" appears in yellow and a yellow icon displays in the upper-right corner

of the screen when the device is in standby mode.

Powerboat Autopilot Operation

Heading Hold

You can engage the autopilot heading hold function to maintain your current

heading without steering the helm.

Engaging the Autopilot

When you engage the autopilot, the autopilot takes control of the helm and steers

the boat to maintain your heading.

From the heading screen, select Engage.

"Heading Hold" appears in green at the top of the heading screen. A green

icon appears in the upper-right corner of the screen when the device is in

heading hold. This icon helps you determine the status of the autopilot and

can be seen on every screen on the device. Your heading shows in the

center of the heading screen.

Heading Adjustment

When the autopilot is engaged, you can adjust the heading using the keys on the

helm control or using the helm if your autopilot is equipped with Shadow Drive™

technology.

Adjusting the Heading with the Helm

NOTE: When you manually maintain a specific heading for a few seconds, the

autopilot resumes control of the new heading.

With the autopilot engaged, manually steer the boat.

A yellow marker and the numerical display on the center of the heading

screen indicate the intended heading.

Adjusting the Heading with the Keys

You can steer your boat using the keys at the bottom of the helm control.

With the autopilot engaged, select an option.

• Select 1°> 10°>> or <<10° <1° to use rudder steering mode. Rudder

steering mode turns the boat in 1° increments, and steers the boat when

you hold a key.

• Hold 1°> 10°>> or <<10° <1° to use step steering mode. Step steering

mode turns the boat in 10° increments.

Direction Control

When your boat is properly equipped, you can control the drive direction of the

boat (forward or reverse) using the helm control.

Enabling Direction Control

Select Menu > Setup > User Autopilot Setup > Direction Control.

Select Enabled.

Using Direction Control

Before you can use direction control, you must enable the direction control

functionality (page 2).

When traveling in standby mode, select Direction.

Heading Screen