Garmin GSD 22 Інструкція з монтажу Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Морське обладнання Garmin GSD 22. Garmin GSD 22 8 сторінок. Marine radio apparatus ( marine sounder)
Також для Garmin GSD 22: Інструкція з монтажу Посібник з монтажу (11 сторінок), Інструкція з монтажу Посібник з монтажу (10 сторінок), Декларація про відповідність (1 сторінок)

Marine Network Wiring and Cables

Garmin Marine Network components use specialized Garmin Network cables. For some installations, it may be necessary to drill 1¼ in.

(32 mm) holes to route the connector end of the cables. Garmin rubber grommets are provided to cover the installation holes (see below).

Wiring instructions are found on the following pages. If you experience difficulty installing the GSD 22, contact Garmin Product Support

or seek the assistance of a professional installer.

The grommets may not be needed in some installations. The grommets do NOT create a waterproof seal. To create a waterproof seal, apply

marine sealant around the grommet and cable after installation. Additional grommets can be purchased from your Garmin dealer or direct from

Garmin. Be sure to test the system before installing the grommets.

Tools

•

Drill

•

1¼ in. (32 mm) paddle drill bit or hole saw

•

Utility knife

•

Marine sealant (optional)

To install a Cable Grommet and Cable:

1. Mark the location through which the Power/Date cable or the Garmin Marine network cable will be routed.

2. Use a 1¼ in. (32 mm) paddle drill bit or hole saw to drill the installation hole.

3. Refer to the diagram below for trimming instructions. Carefully trim the cable hole, as needed.

4. Route the cable to the GSD 22.

5. Spread the grommet apart at the split, and place it around the cable (see below).

6. Firmly push the grommet into the installation hole until it is seated.

7. Test the connection before applying marine sealant, as needed, to create a waterproof seal.

Cable hole for the Power/Data, Garmin Marine

Network, or GPS 7 Cable

Split

GSD 22 Installation Instructions