Garmin VHF 315 Series Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Морське радіо Garmin VHF 315 Series. Garmin VHF 315 Series 32 сторінки.
Також для Garmin VHF 315 Series: Інструкція з монтажу Посібник з монтажу (6 сторінок), Інструкція з монтажу Посібник з монтажу (15 сторінок)

Receiving Position Requests

You can configure the radio to reply automatically to incoming position requests, or prompt you to review and

approve the incoming requests before replying

When you receive a position request with automatic position replies enabled, SENDING ACKNOWLEDGE

appears on the screen, and the radio sends your position automatically. After the position successfully

transmits, POSITION SENT appears on the screen.

When you receive a position request with automatic position replies disabled, POS. REQUEST appears on the

screen.

When you receive a position request with automatic position replies disabled, select OK, and select an

option:

• To reply to the position request with your current position, select OK.

If GPS-position or manual-position data is available, the radio transmits your position to the other vessel.

• To ignore the position request, press CLEAR.

When you receive a position call, POS. SEND and the position data appear on the screen.

Select OK.

The radio saves the position report in the call log.

When you receive a group call, GROUP appears on the screen, and the radio prompts you to change to the

requested channel. If the channel requested is invalid, INVALID CH REQUEST appears on the screen.

1 Select OK.

2 Turn the ENTER dial to select the requested channel.

3 Select OK.

When you enable position tracking, the radio uses interval-based position requests to track up to three vessels.

Your radio transmits received position data over the NMEA network, and you can track the vessels using your

Garmin chartplotter

(Configuring DSC NMEA Transmissions, page

Before you can use position tracking, you must have at least one vessel saved in the directory

page

18).

1 Select DSC > POS. TRACKING > ADD ENTRY.

2 Select the vessels you want to track.

You can track the position of up to three vessels at one time. If you select a fourth vessel, the radio sounds

an error tone, and you must remove a vessel before you can add a new one.

3 Select BEGIN TRACKING.

appears on the screen when the radio tracks vessels.

Digital Selective Calling

(Sending Automatic Replies, page

21).

19).

(Directory,