Brother PDS-6000 Посібник з швидкого налаштування - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Принтер "Все в одному Brother PDS-6000. Brother PDS-6000 18 сторінок.
Також для Brother PDS-6000: Посібник із швидкого старту (15 сторінок)
Друкувати сторінкуProduct Safety Guide
WARNING
The unit should be connected to an AC power
source within the range indicated on Specifications
in the User's Guide. DO NOT connect it to a DC
power source or inverter. Doing this might cause
an electrical shock or a risk of fire. If you are not
sure what kind of power source you have, contact
a qualified electrician.
This product must be installed near an AC power
outlet that is easily accessible. In case of an
emergency, you must unplug the power cord from
the AC power outlet to shut off the power completely.
IMPORTANT
• Brother cannot accept any financial or other
responsibilities that may be the result of your
use of this information, including direct, special
or consequential damages. There are no
warranties extended or granted by this
document.
• This machine has been certified to comply with
FCC standards, which are applied to the USA
only.
• Changes or modifications not expressly
approved by Brother Industries, Ltd. could void
the user's authority to operate the equipment.
DO NOT expose the unit to direct sunlight,
excessive heat, open flames, corrosive gasses,
moisture or dust.
DO NOT place the unit on a carpet or rug, as this
will expose it to dust. Exposing the unit to dust may
create a risk of an electrical short or fire. It may
also damage the unit and/or render it inoperable.
DO NOT place the unit near heaters, air
conditioners, electric fans, refrigerators, radiators,
or water. Doing so may create the risk of a short
circuit or fire should water come into contact with
the unit (including condensation from heating, air
conditioning, and/or ventilation equipment that
may be sufficient to create a short circuit or fire).
DO NOT place the unit near chemicals or in a
place where chemicals could be spilled on it.
Should chemicals come into contact with the unit,
there may be a risk of fire or electric shock. In
particular, organic solvents or liquids such as
benzene, paint thinner, polish remover, or
deodorizer may melt or dissolve the plastic cover
and/or cables, resulting in a risk of fire or electric
shock. These or other chemicals may also cause
the unit to malfunction or become discolored.
The product should be placed so as not to come into
contact with any wall or other device. Otherwise, it
could create a risk of overheating and/or fire.
Instead:
• Place the unit on a solid surface, never on a
bed, sofa, rug, or other similar soft surface.
CAUTION
Avoid placing the unit in a high-traffic area. If you
must place it in a high-traffic area, ensure that the
unit is in a safe location where it cannot be
accidentally knocked over, which could cause
injury to you and serious damage to the unit.
Ensure that cables and cords leading to the unit
are secured so as not to pose a tripping hazard.
DO NOT place the unit on an unstable or tilted
cart, stand, table or on any tilted/slanted surface.
The machine is heavy and may fall, causing injury
to you or others and serious damage to the unit.
Make sure that no part of the unit protrudes from
the desk or stand where the unit is located. Make
sure that the unit is located on a flat, level, and
stable surface free from vibration. Failure to
observe these precautions could cause the unit to
fall, causing injury to you or others and serious
damage to the unit.
9