AEG 66201 KF-N Посібник з монтажу та експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Варильна поверхня AEG 66201 KF-N. AEG 66201 KF-N 36 сторінок. Aeg ceramic hob installation and operating instructions 66201 kf-n
Також для AEG 66201 KF-N: Брошура та технічні характеристики (12 сторінок), Посібник користувача (32 сторінок), Посібник з монтажу та експлуатації (32 сторінок)

2. Touch the "double ring" sensor panel.

This will switch the setting to the outer heating ring. The control light

will illuminate.

3. To switch off the outer heating ring, touch the "double ring" sensor

panel, and the outer heating ring will switch off.

STOP+GO function

When the "Stop+Go" sensor panel is actuated all cooking zones that

are switched on are simultaneously switched to the keep warm setting.

The control light for the "Stop+Go" sensor panel will illuminate. The

keep warm setting will be indicated in the display with u.

When the "Stop+Go" sensor panel is actuated again, the cooking set-

tings that were previously selected are reset and the control light goes

out.

The timer is not stopped by the Stop+Go function.

If an automatic warm up function was selected in the heating up

stage a this will be stopped by the Stop+Go function, and the previ-

ously selected cooking setting will be reset by actuating the "Stop+Go"

sensor panel again.