AEG 66201 KF-N Посібник з монтажу та експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Варильна поверхня AEG 66201 KF-N. AEG 66201 KF-N 36 сторінок. Aeg ceramic hob installation and operating instructions 66201 kf-n
Також для AEG 66201 KF-N: Брошура та технічні характеристики (12 сторінок), Посібник користувача (32 сторінок), Посібник з монтажу та експлуатації (32 сторінок)

Cooking using the automatic warm up function

All of the cooking surface's four cooking zones can be adjusted to any

of nine settings, and are equipped with an automatic warm up func-

tion:

– ¿, lowest heat setting

– Ç, highest heat setting

– a, automatic warm up function.

When you select the desired heat setting using the

lector sensor panel, the cooking zone will operate at maximum power

for a certain period of time and will then automatically switch back to

the follow-on heat setting that has been set.

The length of time that the automatic warm up function operates de-

pends on the follow-on heat setting selected.

1. Touch the heat setting selector sensor panel

setting from ¿ to Æ. The heat setting that has been set will then be

displayed. After a period of 5 seconds, the a (=automatic warm up

function) will appear in the display in place of the heat setting. After

the warm up period has finished, the heat setting will once more be

displayed.

If you should choose a higher heat setting while the automatic func-

tion is in operation, e.g. from Á to Ã, the period of time that the warm

up function is in operation will be adjusted accordingly. If you select a

lower setting, the warm up period will end immediately.

You can cook using the automatic warm up function only if the cook-

ing zone is cold or moderately warm. If a cooking zone is already hot

when you switch it on (h indicator), the automatic warm up function

cannot be used.

heat setting se-

to set the desired heat