Brother GTX pro Короткий посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Короткий посібник користувача для Принтер Brother GTX pro. Brother GTX pro 15 сторінок. Garment printer
Також для Brother GTX pro: Довідковий посібник (13 сторінок), Посібник користувача (16 сторінок), Посібник з налаштування (40 сторінок)

Open the cartridge's lid on a flat surface and remove the empty pouch. Carefully unpack a new ink

pouch from its shipping carton.

Push the green tip end of the ink pouch into the cartridge until it clicks into place. Straighten the ink

pouch to align it with the gutter of the lid of cartridge, and mount in position inside the metal spring

by pulling it with your hand. If the edge of the ink pouch is bent or wrinkled, smooth it out with your

hands to remove wrinkles.

Place the pouch in horizontal alignment with the cartridge. Ensure lines of the catridge and pouch

are in alignment.

Close the lid, and verify the spring is rolling to the front. If spring does not roll, smooth out wrinkles

and try again. Place the cartridge at a 45° angle and push on the 2 upper metallic latches to add

a bit more tension on the ink pouch. Double-check that you have not generated more wrinkles.

Clean the outside of the green tip end that goes in contact with needle inside printer.

Attach a shelf life sticker included with ink pouch onto the front of the cartridge.

> If you are not trying to avoid wrinkles like explained above, you could get the errors 2084 & 2085

displaying: "Winding-up Failure"

BEST PRACTICE FOR PRINTING - A MUST!

> Always keep the closest distance between the printheads and the surface of the garment.

It is very important for the long life of your printer.

INK POUCH REPLACEMENT

Good Gap

Excessive Gap