Brother GTX pro Посібник з налаштування - Сторінка 23

Переглянути онлайн або завантажити pdf Посібник з налаштування для Принтер Brother GTX pro. Brother GTX pro 40 сторінок. Garment printer
Також для Brother GTX pro: Довідковий посібник (13 сторінок), Короткий посібник користувача (15 сторінок), Посібник користувача (16 сторінок)

(e)

Bk1

Remove four caps of the head.

Check that the head and the marker of each tube are matched

and connect the tubes one by one from back to front of the

machine by rotating the nut until it stops.

Do not rotate the nut as illustrated in (e). It could

disconnect the tube and leak the contained ink.

IMPORTANT

Be sure to remove the caps attached to the

head before connecting.

Filling the cleaning solution

FULL

X0380

LOW

Pull out the cleaning liquid tank from the side of the printer;

enough to open the lid of the tank and fill the tank with the

cleaning solution until reaching the "FULL" line.

When filling is completed, close the lid and slowly push the

cleaning liquid tank back inside the printer for storage.

When you pour the cleaning solution, be sure

not to exceed the "FULL" line.

IMPORTANT

After filling the cleaning solution, make sure to

push the cleaning liquid tank in to the end. The

cleaning liquid tank that is not properly inserted

TIPS

causes an error and disables printing.

X0025