Brother TD-4420TN Посібник користувача - Сторінка 36

Переглянути онлайн або завантажити pdf Посібник користувача для Принтер Brother TD-4420TN. Brother TD-4420TN 44 сторінки. Cutter module
Також для Brother TD-4420TN: Посібник з монтажу (2 сторінок)

Друкувати сторінку

1. Troubleshooting

4.3.5 Media Sensor Calibration (For the Gap Sensor)

1. Turn off the printer.

2. Press and hold the Feed/Pause Button, and then turn on the printer.

3. Release the button after the green/amber LED flashes five times and the LED is lit in

red/amber.

Note

The LED color will change as follows:

Amber  red (5 times)  amber (5 times)  green (5 times)  green/amber (5 times) 

red/amber (5 times)  green (lit)

4.3.6 Skip the AUTO.BAS program

The user can upload the AUTO.BAS program to the printer's flash memory so that it can be run

automatically at startup.

To prevent the AUTO.BAS program from running at startup:

1. Turn off the printer.

2. Press the Feed/Pause Button, and then turn on the printer.

3. Release the button when the LED is lit in green.

Note

The LED color will change in the following order:

Amber  red (5 times)  amber (5 times)  green (5 times)  green/amber (5 times) 

red/amber (5 times)  green (lit)

4. The printer will start without running the AUTO.BAS program.