Fujitsu PRIMERGY RX200 S6 Посібник із сервісного доповнення - Сторінка 35

Переглянути онлайн або завантажити pdf Посібник із сервісного доповнення для Сервер Fujitsu PRIMERGY RX200 S6. Fujitsu PRIMERGY RX200 S6 50 сторінок.

Ê Reinstall the air duct (see the

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

4.6

Replacing the power-distribution module

The power-distribution module comprises a power backplane and a housing. In

case of a defect, you must replace the complete unit.

Removing the defective power-distribution module

Ê Remove the power supply unit(s) before you pull the server out of the rack.

Ê Open the server as described in the

page

23.

Ê Disconnect the power cables of the power-distribution module from the HDD

backplane and the system board (see the cabling plans in the Appendix of

the Options Guide).

Figure 15: Removing the power-distribution module

Ê Remove the two screws (see circles).

RX200 S6

section "Installing the air duct" on page

section "Opening/closing the server" on

Service Supplement

Replacement routines

26).