Fujitsu SPARC Enterprise M5000 Примітки до продукту - Сторінка 23

Переглянути онлайн або завантажити pdf Примітки до продукту для Сервер Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 44 сторінки. Rci build procedure
Також для Fujitsu SPARC Enterprise M5000: Посібник з експлуатації (30 сторінок), Додатковий посібник (36 сторінок), Посібник для початківців (4 сторінок)

Updates of the SPARC Enterprise M4000/M5000

Servers Service Manual

The following information supersedes the information in the SPARC Enterprise

M4000/M5000 Servers Service Manual.

Caution – Do not force the PCI cassette into a slot. Doing so can cause damage to the

cassette and server.

1. Align the PCI cassette on the gray plastic guide and install it into the slot.

2. Lock the lever into place to seat the cassette.

Note – As the lever is moved pressure will build up, then just prior to locking into

place the pressure will suddenly release. If the lever locks in place without the

pressure release, the card may not be seated correctly. If this happens the card

should be removed and reinstalled.

Note – When you insert the PCI cassette using hot-swap, the cassette is

automatically powered on and configured. Check that the power LED on the cassette

is LIT to be certain the cassette is correctly seated.

3. Connect all cables to the PCI cassette and reconnect the cable management arm if

necessary.

SPARC Enterprise M4000/M5000 Servers Product Notes