A-M Systems 2100 Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади A-M Systems 2100. A-M Systems 2100 19 сторінок. Isolated pulse stimulator
Друкувати сторінку
This LED indicates when a pulse is ongoing.
EVENT:
This LED indicates when the internal output amplifier cannot output the pulse
ERROR:
as desired. This is usually due to a short circuit while trying to output a voltage, or an
open circuit while trying to output a current.
The Pulse Sign control in the Output section directly affects waveform timing.
NOTE:
When set to the Biphasic mode, a positive-going pulse is immediately followed by a
negative-going pulse. This effectively doubles the pulse "duration". If a burst of
biphasic pulses is being produced the period must be at least twice the single pulse
duration. In the Square wave mode, the baseline disappears as long as the burst
persists.
A-M Systems
131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324
Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525
E-mail: [email protected] * Website:
http://www.a-msystems.com
5