Fujitsu ScanSnap iX500 Посібник для початківців - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник для початківців для Сканер Fujitsu ScanSnap iX500. Fujitsu ScanSnap iX500 17 сторінок. Windows
Також для Fujitsu ScanSnap iX500: Посібник для початківців (16 сторінок), Посібник з швидкого налаштування (3 сторінок), Початок роботи (18 сторінок), Заходи безпеки (11 сторінок), Посібник (2 сторінок), Посібник із швидкого старту (2 сторінок), Посібник з підключення до Wi-Fi (41 сторінок)

Scan Test (Wireless LAN Connection)

Check that the image scanned by the ScanSnap is sent to the computer or mobile device.

ATTENTION

If the ScanSnap Wireless Setup Tool or the Wireless Network Setup Wizard is running, exit them.

Disconnect the USB cable connecting the ScanSnap to the computer.

ATTENTION

If the ScanSnap Manager icon is

the mobile device.

The ScanSnap is connected to a computer via wireless LAN, and the ScanSnap Manager icon

changes to

Scan a document with the ScanSnap.

For details, refer to

Start ScanSnap Connect Application on the mobile device to connect to the ScanSnap.

For details, refer to the ScanSnap Connect Application User's Guide.

Scan a document with the ScanSnap.

For details, refer to

The scanned image is displayed on the mobile device when the scanning is complete.

If the scanned image is displayed on the mobile device, then the scanning check is complete.

ATTENTION

Depending on the ScanSnap installation location, it may take some time until the scanned image is

displayed on the mobile device. For details, refer to "Troubleshooting" in the ScanSnap Manager Help.

If the scanned image is not displayed on the mobile device after the scanning is complete, refer to the

ScanSnap Connect Application User's Guide.

(

"Scan Test (USB Connection)" (page

(

), exit ScanSnap Connect Application on

11).