Fujitsu ScanSnap iX500 시작하기 매뉴얼 - 페이지 15
{카테고리_이름} Fujitsu ScanSnap iX500에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap iX500 17 페이지. Windows
Fujitsu ScanSnap iX500에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (16 페이지), 빠른 설정 매뉴얼 (3 페이지), 시작하기 (18 페이지), 안전 주의사항 (11 페이지), 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), Wi-Fi 연결 매뉴얼 (41 페이지)
페이지 인쇄
Scan Test (Wireless LAN Connection)
Check that the image scanned by the ScanSnap is sent to the computer or mobile device.
ATTENTION
If the ScanSnap Wireless Setup Tool or the Wireless Network Setup Wizard is running, exit them.
When You Connect a Computer to the ScanSnap
1.
Disconnect the USB cable connecting the ScanSnap to the computer.
ATTENTION
If the ScanSnap Manager icon is
the mobile device.
The ScanSnap is connected to a computer via wireless LAN, and the ScanSnap Manager icon
changes to
2.
Scan a document with the ScanSnap.
For details, refer to
When You Connect a Mobile Device to the ScanSnap
1.
Start ScanSnap Connect Application on the mobile device to connect to the ScanSnap.
For details, refer to the ScanSnap Connect Application User's Guide.
2.
Scan a document with the ScanSnap.
For details, refer to
The scanned image is displayed on the mobile device when the scanning is complete.
If the scanned image is displayed on the mobile device, then the scanning check is complete.
ATTENTION
Depending on the ScanSnap installation location, it may take some time until the scanned image is
displayed on the mobile device. For details, refer to "Troubleshooting" in the ScanSnap Manager Help.
If the scanned image is not displayed on the mobile device after the scanning is complete, refer to the
ScanSnap Connect Application User's Guide.
(
(
)/
(
"Scan Test (USB Connection)" (page
"Scan Test (USB Connection)" (page
)/
(
), exit ScanSnap Connect Application on
).
11).
11).
15