Brother HL-5270DN Посібник з швидкого налаштування - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother HL-5270DN. Brother HL-5270DN 23 сторінки. Laser printer
Також для Brother HL-5270DN: Посібник з експлуатації (9 сторінок), Посібник з експлуатації (12 сторінок), Посібник з швидкого налаштування (34 сторінок)
Друкувати сторінку
Regulations
Important
A shielded interface cable should be used in order to
ensure compliance with the limits for a Class B digital
device.
Changes or modifications not expressly approved by
Brother Industries, Ltd. could void the user's authority
to operate the equipment.
Radio interference (220-240 volt model only)
This printer follows EN55022 (CISPR Publication
22)/Class B.
Before you use this product, make sure that you use
one of the following interface cables.
1 A shielded parallel interface cable with twisted-pair
conductors and that it is marked "IEEE 1284
compliant".
2 A USB cable.
The cable must not be more than 2 meters long.
EC Declaration of Conformity
Safety Precautions
Caution
Use of controls, adjustments or performance of
procedures other than those specified in this manual
may result in hazardous radiation exposure.
IEC 60825-1 specification (220 to 240 volt model
only)
This printer is a Class 1 laser product as defined in
IEC 60825-1 specifications. The label shown below is
attached in countries where it is needed.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
This printer has a Class 3B laser diode which
produces invisible laser radiation in the laser unit. You
should not open the laser unit under any
circumstances.
Caution
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Internal laser radiation
Maximum
5 mW
radiation power:
Wave length:
770 - 810 nm
Laser class:
Class 3B
3