Brother HL-5270DN Посібник з швидкого налаштування - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother HL-5270DN. Brother HL-5270DN 23 сторінки. Laser printer
Також для Brother HL-5270DN: Посібник з експлуатації (9 сторінок), Посібник з експлуатації (12 сторінок), Посібник з швидкого налаштування (34 сторінок)

Safety Precautions

IMPORTANT - For Your Safety

To ensure safe operation, the supplied three-pin plug

must be inserted only into a standard three-pin power

outlet that is properly grounded through the normal

household wiring.

Extension cords used with this printer must be three-

pin plug type and correctly wired to provide proper

grounding. Incorrectly wired extension cords may

cause personal injury and equipment damage.

The fact that the equipment operates satisfactorily

does not imply that the power is grounded and that

the installation is completely safe. For your safety, if

in any doubt about the effective grounding of the

power, call a qualified electrician.

This product should be connected to an AC power

source within the range indicated on the rating label.

DO NOT connect it to a DC power source. If you are

not sure, contact a qualified electrician.

Disconnect device

You must install this printer near a power outlet that is

easily accessible. In case of an emergency, you must

disconnect the power cord from the power outlet to

shut off the power completely.

Caution for LAN connection

Connect this product to a LAN connection that is not

subjected to over voltages.

Warning - This printer must be earthed.

The wires in the mains lead are coloured in line with

the following code:

Green and Yellow: Earth

Blue:

Brown:

If in any doubt, call a qualified electrician.

Neutral

Live