Brother Quattro 2 6700D Посібник з експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Програмне забезпечення Brother Quattro 2 6700D. Brother Quattro 2 6700D 16 сторінок. Kit para crear efectos decorativos con bobinas
Також для Brother Quattro 2 6700D: Посібник з експлуатації (50 сторінок), Інструкція з експлуатації (40 сторінок), (Англійська) Інструкція з експлуатації (16 сторінок)

TROUBLESHOOTING

Several solutions for minor problems are described below. If the problem persists, contact your nearest authorized

dealer.

■ The thread was accidentally cut

automatically and the bobbin thread is

caught inside the machine (Only for

machines equipped with the automatic

thread cutting function)

Cut the thread near the fabric above the

needle plate, and then remove the fabric.

Thread

Remove the bobbin, and then hold it out

toward the left side of the machine.

Lower the presser foot.

Press the "Thread Cutter" button again, and

then pull the thread out to the left while the

thread cutter is operating.

CAUTION

• Do not pull on the thread with excessive force,

otherwise the machine may be damaged.

■ The pattern is misaligned

Refer to "ADJUSTING THE THREAD TENSION" and

increase the upper thread tension. If the pattern is still

misaligned, reduce the tension of the bobbin thread.

Example: Decorative Stitch

Correct tension

The upper thread tension is too loose, or the bobbin

thread tension is too tight.

■ The bobbin thread catches on the tension

spring of the bobbin case

Sew with no tension applied to the bobbin thread.

(Refer to "When tension is not applied to the bobbin

thread" on page 6.)