AEG 925513017 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Морозильна камера AEG 925513017. AEG 925513017 40 сторінок.

Друкувати сторінку

Problem

The compressor does not

start immediately after

pressing the "FROSTMAT-

IC", or after changing the

temperature.

Water flows inside the refrig-

erator.

Water flows on the floor.

Temperature cannot be set.

The temperature in the ap-

pliance is too low/too high.

Possible cause

Appliance is fully loaded

and it is set to the lowest

temperature

Temperature set in the ap-

pliance is too low and the

ambient temperature is

too high.

Temperature is set incor-

rectly.

This is normal, no error has

occurred.

Food products prevent the

water to flow into the wa-

ter collector.

The water outlet is clog-

ged.

The melting water outlet is

not connected to the

evaporative tray above the

compressor.

The "FROSTMATIC func-

tion" is switched on.

The temperature regulator

is not set correctly.

The door is not closed cor-

rectly.

The food products' tem-

perature is too high.

Many food products are

stored at the same time.

The thickness of the frost is

greater than 4-5 mm.

ENGLISH

Solution

Set a higher temperature. Re-

fer to "Operation".

Set a higher temperature. Re-

fer to "Operation"

Refer to "Operation" .

The compressor starts after a

period of time.

Make sure that food products

do not touch the rear plate.

Clean the water outlet.

Attach the melting water out-

let to the evaporative tray.

Switch off "FROSTMATIC

function" manually, or wait un-

til the function resets automat-

ically to set the temperature.

Refer to "FROSTMATIC func-

tion".

Set a higher/lower tempera-

ture.

Refer to "Closing the door".

Let the food products temper-

ature decrease to room tem-

perature before storage.

Add less food products at the

same time.

Defrost the appliance.