2N Lift8 Короткий посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Короткий посібник для Блок управління 2N Lift8. 2N Lift8 12 сторінок. Io module
Також для 2N Lift8: Короткий посібник (8 сторінок), Короткий посібник (13 сторінок), Короткий посібник (14 сторінок), Короткий посібник (6 сторінок), Короткий посібник (12 сторінок), Короткий посібник (17 сторінок)

Error during programming



If you make an error when entering the number (either for the number of the

function or the value), and you realise this before you press the asterisk, you can

cancel the entire number by pressing the



If L8 rejects the selected number of the parameter or specified value, it is

possible to continue programming – the number of the function must be entered

again even if only the value was incorrect.



If you program a value other than the one you wanted, and the value is saved,

you can naturally enter the correct number again.

End of programming



If you call the L8 via a telephone number. End programming by hanging up.



If you are programming via the machine room audio unit, by pressing

than 2 seconds) you end programming and put the audio unit on standby.



If you only want to go back one menu, press

Cooperating 2N

Service tool

The application is intended for remote supervision and configuration of 2N

communicators.

Control panel

The application is intended for the administration of users, lifts and authorisations.

Communicator

The application is intended for the receipt of emergency calls by a dispatcher.

Server

The application processes the control calls and mediates communication between the

central units and PC applications.

applications

symbol and enter it again.

(longer

Lift8