Kohler 20341T-PNE-CP Інструкція з монтажу Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Сантехнічний виріб Kohler 20341T-PNE-CP. Kohler 20341T-PNE-CP 10 сторінок. Pneumatic in-wall tank with frame short height

Друкувати сторінку

3. Carefully loosen the four locking screws by rotating them clockwise until

the screw slots align with open tabs.

Warning: No tools or excessive force should be used to rotate the locking

screws to the ''OPEN'' position.

4. Disassemble faceplate supporting frame as shown.

5. Rotate the shut off valve actuator handle clockwise to

open and anti-clockwise to close.

6. Unscrew the hose from the inlet valve. Press the release

clip and lift to remove the inlet valve.

7. Push the clip of the toilet detergent box and lift to remove

from cistern.

8. Disconnect the oultet valve actuator arms for the full and

reduced flush by pushing towards the centre of the cistern

while applying pressure to both top and bottom of the pivot.

Remove the pneumatic actuator assembly by lifting the rear

of the frame to release the snap clips. Hold the pneumatic

hose ends and pull up to remove.

1310920-A02-A

Locking bolt

Open

Valve

Quick release

connector

Nut

Clip

Snap (locked)

Lever snap

- 8 -

Locking plate