a-TroniX Jump starter Booster 12V 4000A Інструкція з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Подовжувач a-TroniX Jump starter Booster 12V 4000A. a-TroniX Jump starter Booster 12V 4000A 15 сторінок.

a-TroniX Jump starter Booster 12V 4000A Інструкція з експлуатації
Instruction Manual
Jump starter Booster 12V 4000A
4. Internal auxiliary battery 9V
of the jump starter
The jump starter is equipped with a 9V auxiliary battery, which is essential to power the
control processor.
When the „Err 5" alarm turns on, replace the battery.
To replace, open the flap on the back of the device housing, remove the battery,
disconnect the poles and insert a new battery.
Close the flap again.

5. How to charge the jump starter

CAUTION:
Charge the emergency starter for at least 8 hours immediately after purchase
and each time you use it. When the emergency starter is not in use, charge it for
8 hours at least every 6 months to keep the internal battery in good condition.
Charge the emergency starter with the 230VAC charger:
Make sure that no device is connected to the emergency starter. Use the TEST
button to check the charge level on the voltmeter (red = battery at 30% –
yellow = battery at 60% – green = battery at 100%).
NOTES:
If the voltmeter display is not green, charge the emergency starter's battery.
Plug the charger into the socket of the 230 V household network.
Insert the charger plug into the charging socket on the front of the „Input
Charge" starting help.
After the charging process is complete, do not leave the jump starter
connected to the battery charger for a long time.
Do not use the device while it is charging.
CAUTION:
Use only the charger supplied.
09/2021
Page 9