Aqua Computer AQUASTREAM XT USB Посібник користувача та інструкція з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача та інструкція з експлуатації для Водяний насос Aqua Computer AQUASTREAM XT USB. Aqua Computer AQUASTREAM XT USB 16 сторінок.
Також для Aqua Computer AQUASTREAM XT USB: Посібник з експлуатації та встановлення (20 сторінок)
Друкувати сторінку
aqua
computer
Version 11/2007
MANUAL AQUASTREAM XT
8.6. Window „Sensor calibration"
In the upper area you see a summary of the measured temperatures for all
three sensors.
The firmware of the aquastream XT contains a pre-calibrated temperature
curve for each temperature sensor. In case that the measured temperature
differs from the real temperature, experienced users can do a correction in
this window. Usually no correction should be necessary. At first select the
desired sensor. You can then adjust the associated ADC value for every
predefined temperature and therefore change the course of the calibration
curve. The curve is immediately updated at changes and you can immediately
check the temperature calculated from the new values, too. To guarantee a
continuous precision, it might be necessary to calibrate several points.
To restore the original temperature curves click on the button "load default
values in the lower left corner". Your individual settings will be deleted and
replaced with the default curves.
8.7. Windows „Extended pump settings"
The extended pump settings are deactivated at all pumps and can be
activated only with a key which can be ordered free of charge. This key
exclusively activates the extended functions and does not have influence on
the functions of the individual aquastream variants.
WARNING:
the extended pump settings partly engage deeply in the drive of
the pump and can damage the pump and its controller irreparably. We take
no responsibility for damages to the pump or possible resultant damages to
hardware and software.
When asking for a key this will be noted in a database and you will lose the
guarantee!
8.8. Window „Pump information and key management"
Besides general data of the pump and the fan you also find the key
management here which determines which function range certainly is
activated. For activation of another variant you need the serial number and
the public key of the pump. Both must be wrote in the remark field of the
shop when you order an upgrade. You find more information regarding the
different pump variants on page 4.
© 2007
Aqua Computer GmbH und Co. KG
Page 13
Gelliehäuser Str. 1 – D-37130 Gleichen - Germany