Aqua Flo AQUV-12R2 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Системи фільтрації води Aqua Flo AQUV-12R2. Aqua Flo AQUV-12R2 16 сторінок. Ultraviolet disinfection system
Друкувати сторінкуUnpacking the UV System
Your UV system includes the following items:
Install Location
If your water comes from a well or a lake/river etc., the UV should be installed after your pump and pressure tank. To prevent damage to the UV
system, do not install it between well pump and pressure tank. If you have other water filters/conditioner installed, such as softener/iron filter etc.,
the UV system should always be installed as the last step of treatment before the water pipes divide into hot and cold (Fig 2).
Hot water
Cold water
to house
to house
UV System
Water Heater
Fittings Required for Installation (Not Included)
Fittings required for a typical install on 3/4" copper pipe are 3/4" FNPT female adapters, 3/4" Tee, 3/4" Elbows, 3/4" copper pipe, 3/4" union
couplings and 3/4" ball valves. You may need different fittings if your pipe size or material is different. If you are unsure of what fittings to use,
please call Aqua Flo.
UV light can degrade plastics over time. If your water pipe is plastic (such as PEX), it is
recommended that you use at least 6 to 12 inches of UV-resistant material (e.g. copper)
on the inlet and outlet of the UV unit to prevent damage, and potential flooding.
UV Lamp
Quartz Dome
UV UNIT
Water Meter
OR
Well Water
Pressure Tank
Ballast with lamp
connector
Gland Nut
Wrench
Note: Filter cartridges come installed in the filter sumps.
You must remove the plastic wrap from the filter cartridges before use.
Fig. 2
City Water
Water
Flow
Well Water
CAUTION
Dome O-Ring
(Thicker)
Lamp Spring
Gland Nut O-Ring
(Thinner)
Ballast Mounting
Nuts & Bolts
Water
Water
OR
Flow
Flow
Fig. 3
Water
Flow
7