Avonic AV-CON300 Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Контролер Avonic AV-CON300. Avonic AV-CON300 16 сторінок. Ptz camera controller
Також для Avonic AV-CON300: Посібник користувача (13 сторінок), Посібник із швидкого старту (2 сторінок)

Друкувати сторінку

Rotate the "B" knob that triggers the manual white balance mode, which can adjust the depth of the

blue, "+" the blue becomes darker, and the "blue" becomes lighter;

9. The camera OSD menu call

Press the "CAMERA OSD" button to call the camera OSD menu. If camera is connected, the OSD of

the camera is displayed on the monitor.

NOTE: the CAMERA OSD button will be lit red and turns off for a moment. Please do not use the

controller for the moment. After the controller reads the Acknowledge signal of the camera the

button will light red again. The controller is now ready to navigate the OSD of the camera.

The joystick navigates up and down through the menu. To choose an menu item, the Zoom Rocker to

TELE. To change a value of a menu setting, move the joystick to the left or the right. The Zoom

Rocker to WIDE moves 1 level up in the menu.

The IRIS button can also be used to select a menu item by turning right. Turn it to the left to move 1

level up.