Billib Mantel & Wall Clocks Інструкція та посібник з догляду - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція та посібник з догляду для Годинник Billib Mantel & Wall Clocks. Billib Mantel & Wall Clocks 10 сторінок.
Друкувати сторінкуBilliB
Minute Hand
Strike Wind
2
Hour Hand
Chime On/Off
Selector
Chime Wind
Time Wind
Time Adjustment
Screw
Chime Hammers
Chime Rods
BilliB
Fig. 1
Back Door
Access
Front Door
Access
Fig. 2
Chime
Hammer
Cardboard
Packing
Chime
Rods
Fig. 3
Beat Plate
Fastening Hole
Setting Up Your Clock
For Wind-Up
Mantel & Wall Clocks
1. Unpack
Remove contents from master carton:
Pendulum - Select models only, usually
fastened to side of car ton, sometimes f astened
to inside of clock cabinet.
Clock - Remove protective plastic bag.
Winding Crank
Warranty
2. Locate Access to Clock Mechanism
There are two possible mechanism
access options:
Back Panel
Front Door
3. Remove Mechanism Packing Material
Carefully remove the cushions supporting the
chime rods and hammers . Slide the cardboard
pad off of the chime rods (Fig. 2).
4. Secure Clock
Position clock in its final location, avoiding
direct sunlight, heating/air conditioning v ents,
heavy traffic or play areas.
Hanging Clocks:
Be sure clock is level, front to back and side
to side. Use a screw with a suitable head and
fasten into raw plug. If clock cannot be
located on a screw use appropriate siz e wall
bolt or other suitable anchor. Hang clock on
metal hanger or hole drilled into upper back
of clock.
Some wall clocks have a beat plate on the
lower inside of the cabinet (Fig. 3). There is
a hole in the plate used to f asten the bottom
of the clock to a wall with a nail or screw, to
prevent the clock from swinging sideways.
3