DFx Technology InnEnergy Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Перемикач DFx Technology InnEnergy. DFx Technology InnEnergy 16 сторінок.

button (button 4) to display the 'Trading Hours' data input screen. Trading hours

are programmed into the InnEnergy® device according to day. To select the day

for which trading hours need to be set press the DAY button (button 3) until the

name of the correct day is displayed in the middle of the screen.

Selecting the Correct Time Period:

Up to 4 different opening (OPEN) and closing (CLOSE) times can be set for any

given day, for example, if an establishment opens between 10:00 – 12:00, 12:30

– 13:00, 13:30 – 15:00 and 15:30 – 17:00 on a Monday these opening and closing

times can be programmed into the device for Monday. Each opening and closing

time needs to be programmed separately. By pressing the TIME button (button 2)

it is possible to scroll through these opening and closing times (OPEN1, CLOSE 1,

OPEN 2, CLOSE 2, OPEN 3, CLOSE 3, OPEN 4 and CLOSE 4). Once CLOSE 4

has been reached the InnEnergy device will auto-

matically scroll to the following day when the TIME

button (button 2) is pressed. Please Note: Older

InnEnergy® devices refer to 'OPEN' as 'ON' and

'CLOSE' as 'OFF'.

Inputting Data:

With the 'Trading Hours' data input screen be-

ing displayed choose the desired day and scroll

through the various opening and closing times until

'OPEN 1' is displayed (if this is not already being

shown). The time displayed on the right side of the screen represents the time at

which the establishment first opens on the selected day. To set/change this time

press the > button (button 5). Press the <INC button (button 1) to increment the

highlighted digit. To input the next digit press the SET> button (button 5). Once all

4 digits have been inputted press the SET> button (button 5) to set this new open-

ing time and return to the 'Trading Hours' data input screen. Note: Trading hours

can be programmed to the nearest 10 minutes.

Having set this opening time it is necessary to set the next time at which the

establishment closes on that day. To do this, press the time button (button 2) until

'CLOSE 1' is displayed. To set/change this time press the > button (button 5).

Press the <INC button (button 1) to increment the highlighted digit. To input the

next digit press the SET> button (button 5). As before, once all 4 digits have been

inputted press the SET> button (button 5) to set this new closing time and return

to the 'Trading Hours' data input screen. If the establishment opens again on the

same day, scroll through various opening and closing times until 'OPEN 2' is dis-

played and repeat the process. As stated, up to 4 different trading periods can be

set for any given day.

In some cases not all 4 'OPEN' and 'CLOSE' times will have values (for example,

when an establishment is only open between 11:00 and 23:00 and does not open

for any other periods of the day). Where this is the case all other 'OPEN' and